Introduction

Use the following guide to remove the printhead safely without the use of tools.

Parts

No parts required.

Locate a tab securing the printhead on the right hand side of the printer.
  • Locate a tab securing the printhead on the right hand side of the printer.

Add Comment

Push the tab to the right. The thermal head should release outward.
  • Push the tab to the right. The thermal head should release outward.

Add Comment

Hold the thermal head and pull out gently.
  • Hold the thermal head and pull out gently.

Add Comment

Disconnect the two (tan) harnesses located on opposite sides of the thermal head and remove the printhead.
  • Disconnect the two (tan) harnesses located on opposite sides of the thermal head and remove the printhead.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brian Jagger

Member since: 09/27/2017

301 Reputation

3 Guides authored

Team

Cal Poly, Team S8-G2, Banghart Fall 2017 Member of Cal Poly, Team S8-G2, Banghart Fall 2017

CPSU-BANGHART-F17S8G2

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 14

All Time: 95