Introduction

Use the following guide to remove the ZP 505 feed key using a phillips head screwdriver set.

Remove the following screws securing the top case to the ZP 505.
  • Remove the following screws securing the top case to the ZP 505.

    • Six P1 9.0mm

    • One P0 19.0mm

Add Comment

Close the printer and remove the top cover.
  • Close the printer and remove the top cover.

Add Comment

  • Carefully remove the ribbon cables from feed key.

Add Comment

  • Remove the two P0 6mm screws securing the feed key.

Add Comment

  • Lift and remove the feed key from the printer.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brian Jagger

Member since: 09/27/2017

301 Reputation

3 Guides authored

Team

Cal Poly, Team S8-G2, Banghart Fall 2017 Member of Cal Poly, Team S8-G2, Banghart Fall 2017

CPSU-BANGHART-F17S8G2

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 58