Image 1/1:
  • Remove the old line remaining on the Zebco 33 by pressing down on the large spool release button on the back of the reel. Pull the old line off the reel.

Add Comment

Image 1/1:
  • Open the front spool cover of the Zebco 33 reel by turning it to the left and pulling it straight off.

Add Comment

Image 1/1:
  • Cut the line free from the Zebco 33 spool. Pull the line through the front spool cover and then through the line.

Add Comment

Image 1/1:
  • Thread the line through the hole in the center of the front spool cover and then around the spool of the reel.

Add Comment

Image 1/1:
  • Attach the line to the spool of the Zebco 33 with a knot. Double the knot and then pull the knot down tightly against the spool of the reel. Clip the extra line from the knot.

Add Comment

Image 1/1:
  • Put the front spool cover back on the reel. Hold the line a few inches in front of the spool and apply slight tension to the line. Wind the line onto the reel by turning the handle of the reel.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Renecee

Member since: 02/02/2016

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 18

Past 7 Days: 64

Past 30 Days: 262

All Time: 1,223