Fix Your Stuff Community Store

ZTE Blade Spark Screen Replacement

Introduction

A step-by-step guide on how to replace the screen on a ZTE Blade Spark smartphone.

This guide is useful if the screen is cracked, has dead pixels, or is not displaying anything.

Please use caution and the necessary PPE if working with cracked screen glass.

What you need

  1. ZTE Blade Spark Screen Replacement, Screen: step 1, image 1 of 1

    • Place phone screen side down on a flat surface.

    Edit

  2. ZTE Blade Spark Screen Replacement: step 2, image 1 of 2 ZTE Blade Spark Screen Replacement: step 2, image 2 of 2

    • Take an opening tool, and insert it between the phone's backplate and chassis.

    • Work the tool all the way around perimeter of the phone until the backplate is free.

    Edit

  3. ZTE Blade Spark Screen Replacement: step 3, image 1 of 1

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    Edit

  4. ZTE Blade Spark Screen Replacement: step 4, image 1 of 1

    • Remove the middle plate that was unscrewed from the previous step.

    • At this stage you should have 3 separate parts as shown.

    • For the next step you will be working on the middle part in this picture.

    Edit

  6. ZTE Blade Spark Screen Replacement: step 5, image 1 of 1

    • Take black covering off of battery.

    Edit

  7. ZTE Blade Spark Screen Replacement: step 6, image 1 of 2 ZTE Blade Spark Screen Replacement: step 6, image 2 of 2
    Tool used on this step:
    Tweezers
    $4.99
    Buy

    • Unclip fastener located in the red box. Blunt end tweezers are recommended for this process.

    Edit

  8. ZTE Blade Spark Screen Replacement: step 7, image 1 of 2 ZTE Blade Spark Screen Replacement: step 7, image 2 of 2

    • Remove battery so you are left with the base of the phone, the battery, and the battery cover separated.

    Edit

  9. ZTE Blade Spark Screen Replacement: step 8, image 1 of 1

    • Remove the 4mm screws in the 2 red circles shown with the Phillips #00 screwdriver.

    Edit

  10. ZTE Blade Spark Screen Replacement: step 9, image 1 of 1

    • Heat all 4 sides of the piece with the iOpener to loosen adhesive.

    Edit

  11. ZTE Blade Spark Screen Replacement: step 10, image 1 of 2 ZTE Blade Spark Screen Replacement: step 10, image 2 of 2

    • Now remove the screen from it's base using the opening tool.

    Edit
Conclusion

Swap your old screen with your new screen. To reassemble your device with a new screen, follow these instructions in reverse order.

Author

with 2 other contributors

Solomon Barket

Member since: 03/27/23

181 Reputation

1 Guide authored

Badges: 2

Team

IUPUI, Team 1-3, Harley Spring 2023 Member of IUPUI, Team 1-3, Harley Spring 2023

IUPUI-HARLEY-S23S1G3

3 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 4

All Time: 109