Fix Your Stuff Community Store

ZTE Blade Spark Finger Sensor Assembly Replacement

Introduction

This guide will go through how to disassemble the phone and replace the finger sensor assembly safely. This item has electrical components and should be performed in a dry environment.

What you need

  1. ZTE Blade Spark Finger Sensor Assembly Replacement, Finger Sensor Assembly: step 1, image 1 of 1

    • Carefully open the back cover.

    Edit

  2. ZTE Blade Spark Finger Sensor Assembly Replacement: step 2, image 1 of 2 ZTE Blade Spark Finger Sensor Assembly Replacement: step 2, image 2 of 2

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    Edit

  4. ZTE Blade Spark Finger Sensor Assembly Replacement: step 3, image 1 of 1

    • Slowly remove the back portion of the phone without pulling the attached cable.

    Edit

  5. ZTE Blade Spark Finger Sensor Assembly Replacement: step 4, image 1 of 2 ZTE Blade Spark Finger Sensor Assembly Replacement: step 4, image 2 of 2

    • Release the attached cable and slowly remove the finger sensor from the phone entirely.

    Edit

  6. ZTE Blade Spark Finger Sensor Assembly Replacement: step 5, image 1 of 1

    • Attach the cable of the new sensor to the motherboard of the phone.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Nathaniel Loewito Elijanto

Member since: 03/27/23

121 Reputation

1 Guide authored

Badges: 2

Team

IUPUI, Team 1-3, Harley Spring 2023 Member of IUPUI, Team 1-3, Harley Spring 2023

IUPUI-HARLEY-S23S1G3

3 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 3

All Time: 70