Fix Your Stuff Community Store

Yuneec ST16S Carrying Handle Replacement

Introduction

This guide explains how to replace the carrying handle on the Yuneec ST16S. The handle allows you to carry the device with ease. You can find out more checking the troubleshooting page.

What you need

  1. Yuneec ST16S Carrying Handle Replacement, Battery: step 1, image 1 of 1

    • Hold down the button located above the battery while applying downward pressure to the battery.

    Edit

  2. Yuneec ST16S Carrying Handle Replacement: step 2, image 1 of 2 Yuneec ST16S Carrying Handle Replacement: step 2, image 2 of 2

    • While still holding down the button, slide the battery out of its slot.

    Edit

  3. Yuneec ST16S Carrying Handle Replacement, Backplate: step 3, image 1 of 1

    • Remove the single screw from the battery compartment.

    Edit

  4. Yuneec ST16S Carrying Handle Replacement: step 4, image 1 of 2 Yuneec ST16S Carrying Handle Replacement: step 4, image 2 of 2

    • Remove the rubber bumpers from the back of the device using a spudger.

    Edit

  5. Yuneec ST16S Carrying Handle Replacement: step 5, image 1 of 2 Yuneec ST16S Carrying Handle Replacement: step 5, image 2 of 2

    • Remove the two screws located under each of the rubber bumpers.

    Edit

  6. Yuneec ST16S Carrying Handle Replacement: step 6, image 1 of 3 Yuneec ST16S Carrying Handle Replacement: step 6, image 2 of 3 Yuneec ST16S Carrying Handle Replacement: step 6, image 3 of 3

    • Remove the three screws along the top of the device.

    Edit

  7. Yuneec ST16S Carrying Handle Replacement: step 7, image 1 of 2 Yuneec ST16S Carrying Handle Replacement: step 7, image 2 of 2

    • Carefully remove the backplate from the device.

    Edit

  8. Yuneec ST16S Carrying Handle Replacement, Carrying Handle: step 8, image 1 of 2 Yuneec ST16S Carrying Handle Replacement, Carrying Handle: step 8, image 2 of 2

    • Remove the screws from the clips on both ends of the handle.

    Edit

  9. Yuneec ST16S Carrying Handle Replacement: step 9, image 1 of 2 Yuneec ST16S Carrying Handle Replacement: step 9, image 2 of 2

    • Slide the clips away from the handle.

    Edit

  10. Yuneec ST16S Carrying Handle Replacement: step 10, image 1 of 1

    • Remove the handle from the device.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Christian Resendes

Member since: 10/28/21

589 Reputation

5 Guides authored

Badges: 5

+2 more badges

Team

UMass Dartmouth, Team 4-2, Gulbrandsen Fall 2021 Member of UMass Dartmouth, Team 4-2, Gulbrandsen Fall 2021

UMASSD-GULBRANDSEN-F21S4G2

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 54