Introduction

It's my first guide so hello fixers ! This Xserve G5 is the top of the top : Dual 2.7 Ghz PowerPC G5 from IBM, 2 GB DDR, 3x 80GB. But a sad day, the PSU died. That's all. So now, repair !

Tools

No tools required.

Parts

  1. Here's my dead Xserve G5. I need a new power supply for it. So he will serve for the demo.
    • Here's my dead Xserve G5. I need a new power supply for it. So he will serve for the demo.

  2. Unscrew the two screws.
    • Unscrew the two screws.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Remove the top of the server. You will have something like this.
    • Remove the top of the server. You will have something like this.

  5. Hello little CD drive ! It's retirement time !
    • Hello little CD drive ! It's retirement time !

  6. Disconnect the cable. Push the little metal thing to the left to unsecure the CD drive.
    • Disconnect the cable.

    • Push the little metal thing to the left to unsecure the CD drive.

  7. Push the drive Pull the drive. And finally, take the drive !
    • Push the drive

    • Pull the drive.

    • And finally, take the drive !

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

alphaLONE

Member since: 07/01/2011

675 Reputation

3 Guides authored

2 Comments

Great explanation!

subscriber - Reply

Thanks for the input! I sadly don't have the blade anymore and can't make other, more detailed guides about other components, but I'm still impressed people liked this one.

alphaLONE -

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 29

All Time: 2,866