Introduction
In this guide I will show you how to replace the front bumper.
What you need
-
-
Turn off the device by pressing and holding the power button.
-
-
-
-
Remove the 8 screws from the underside of the bumper
-
Remove the strip
-
Pull the bumper forwards, taking care not to bend the two metal plates
-
Work through the steps in reverse order to reassemble your device.
Work through the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
oldturkey03 is helping us fix the world! Want to contribute?
Start translating ›