Nutri Ninja Ninja Blender Duo BL641 Power Cord Replacement
Allie Decker and 2 other contributors
Last updated on Jan 23, 2024
Views: 5.1K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 30
- Past 30 Days:
- 132
- All Time:
- 5,053
Comments: 3
1 comment on steps, 2 guide comments.
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Power cords can be damaged over time due to various causes. This guide will demonstrate how to replace the power cord.
What you need
-
-
-
Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws).
-
2 of the screws will be star shaped rather than phillips head.
-
Remove the base plate.
Ask FixBot
-
-
-
Identify the red and black wires topped with white-clear caps.
-
Use pliers to squeeze the flattened part of both caps.
-
The black and red wires attached to the power cord should be loose and ready to pull out.
-
-
-
-
Replace the cord by slipping the new cord's black and red wires into the caps.
-
Pinch the middle of the cap back to the flattened position using the pliers.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team S7-G1, Banghart Fall 2017 Member of Cal Poly, Team S7-G1, Banghart Fall 2017
CPSU-BANGHART-F17S7G1
5 Members
72 Guides authored
2 Guide Comments
Como puedo extraer la parte donde sienta el vaso de mi licuadora ninja ct641
Como puedo extraer la base donde asienta el vaso de licuadora ninja ct641
