Introduction

If your Xbox One Elite Controller is not vibrating, your batteries may be low. Here are instructions to help you remove and replace the batteries of your controller.

Tools

Parts

  1. Turn over the controller so that the buttons face down.
    • Turn over the controller so that the buttons face down.

    • Be gentle when removing the cover so you do not break the small plastic tabs holding the cover to the controller.

    • Remove the battery cover carefully by sliding the cover up in the direction of the arrow.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Remove the two batteries AA batteries by lifting them from one end and pulling them out.
    • Remove the two batteries AA batteries by lifting them from one end and pulling them out.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Cara Steinke

Member since: 09/25/2017

932 Reputation

6 Guides authored

Team

Cal Poly, Team S18-G4, Forte Fall 2017 Member of Cal Poly, Team S18-G4, Forte Fall 2017

CPSU-FORTE-F17S18G4

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 14

Past 30 Days: 69

All Time: 783