Fix Your Stuff Community Store

Xbox Duke Controller Face Plate Replacement

Introduction

To remove the faceplate of your Xbox Duke controller and access the internal hardware, follow this guide. This guide is a prerequisite to all other Xbox Duke repair guides that require accessing internal components like the buttons, the potentiometers, motherboard, etc.

What you need

  1. Xbox Duke Controller Face Plate Replacement, Face Plate: step 1, image 1 of 3 Xbox Duke Controller Face Plate Replacement, Face Plate: step 1, image 2 of 3 Xbox Duke Controller Face Plate Replacement, Face Plate: step 1, image 3 of 3

    • Remove the seven black 8 mm screws holding the two halves of the Duke together using a Phillips #1 screwdriver.

    • To reach the deeply set screws, use a longer screw driver or a 4.0 socket bit in addition to the PH1 bit.

    Edit

  3. Xbox Duke Controller Face Plate Replacement: step 2, image 1 of 3 Xbox Duke Controller Face Plate Replacement: step 2, image 2 of 3 Xbox Duke Controller Face Plate Replacement: step 2, image 3 of 3

    • Remove the two halves of the Duke, placing the top plate face-down so the buttons don't fall out.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Anthony Casino

Member since: 02/15/25

630 Reputation

4 Guides authored

Badges: 9

+6 more badges

Team

UMass Dartmouth, Team 1-1, Gulbrandsen Spring 2025 Member of UMass Dartmouth, Team 1-1, Gulbrandsen Spring 2025

UMASSD-GULBRANDSEN-S25S1G1

1 Member

4 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 20

All Time: 128