Fix Your Stuff Community Store

Xbox 360 Faceplate Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

This guide is an internal guide used as a prereq.

What you need

  1. Xbox 360 Faceplate Replacement, Faceplate: step 1, image 1 of 2 Xbox 360 Faceplate Replacement, Faceplate: step 1, image 2 of 2

    • Insert the flat edge of a spudger between the faceplate and the outer casing near the power button.

    • Run your spudger along the edge of the faceplate to release the clips securing it to the front of the console.

    • You may also accomplish this task by using the edge of the Xbox 360 opening tool, but it may scratch the plastic case.

    • Alternatively, you can use your hands to carefully pull the faceplate away from the Xbox.

    Edit

  3. Xbox 360 Faceplate Replacement: step 2, image 1 of 1

    • Repeat the same motions as previously mentioned to release the left side of the faceplate.

    Edit

  4. Xbox 360 Faceplate Replacement: step 3, image 1 of 1

    • Remove the faceplate from the front face of the console.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 901