Remove back cover. Using a spludger and pry tool, carefully pry the back cover off of the main body, starting at the top corner. Continue around the device, being careful to not dislodge the power button.
  • Remove back cover. Using a spludger and pry tool, carefully pry the back cover off of the main body, starting at the top corner. Continue around the device, being careful to not dislodge the power button.

Add Comment

Remove speaker. Using a solder vacuum and soldering iron, release the red wire from the motherboard first, followed by the black. The speaker is held on the back cover with adhesive tape. Using a pry tool, carefully pry the speaker from the back cover. Remove speaker. Using a solder vacuum and soldering iron, release the red wire from the motherboard first, followed by the black. The speaker is held on the back cover with adhesive tape. Using a pry tool, carefully pry the speaker from the back cover.
  • Remove speaker. Using a solder vacuum and soldering iron, release the red wire from the motherboard first, followed by the black. The speaker is held on the back cover with adhesive tape. Using a pry tool, carefully pry the speaker from the back cover.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Kristen John

Member since: 01/26/2015

125 Reputation

1 Guide authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 196