Wyze WVCR200s Rotating Brush Replacement

Introduction

Follow this guide to replace the rotating brush from your Wyze WVCR200s robot vacuum. The rotating brush is a part of the vacuum that will need to be taken out to be cleaned regularly.

Step 1 Rotating Brush

Wyze WVCR200s Rotating Brush Replacement, Rotating Brush: step 1, image 1 of 1

Flip the vacuum upside down so the bottom is facing up.
In the center of the device, you should see the rotating brush that stretches from one wheel to the other.

Edit

Step 2

Pinch the blue tabs below the rotating brush towards each other.
Lift the plastic housing surrounding the rotating brushing straight up, and the remove it from the vacuum.

Edit