Cobra SPX 5300 Device Assembly

You're viewing a previously published version of this guide. View latest version

Nov 16, 2015 - 12:53:06

Dec 09, 2015 - 12:01:14 Dec 09, 2015 - 11:57:21 Dec 09, 2015 - 11:57:19 Nov 16, 2015 - 01:07:40 Nov 16, 2015 - 12:53:06 Nov 13, 2015 - 12:55:48 Nov 13, 2015 - 12:55:30 Nov 13, 2015 - 12:55:18 Nov 13, 2015 - 12:54:36 Nov 13, 2015 - 12:52:37 Nov 13, 2015 - 12:49:11 Nov 13, 2015 - 10:42:50 Nov 13, 2015 - 10:27:07 Nov 13, 2015 - 10:25:04 Nov 11, 2015 - 01:44:35 Nov 11, 2015 - 01:42:45 Nov 11, 2015 - 01:37:49 Nov 11, 2015 - 01:36:25 Nov 11, 2015 - 01:34:18 Nov 11, 2015 - 01:27:28 Nov 11, 2015 - 01:27:06 Nov 11, 2015 - 01:26:27 Nov 11, 2015 - 01:26:05 Nov 11, 2015 - 01:25:09 Nov 11, 2015 - 12:58:05

Newer

What you need

Step 1 Device Assembly

Cobra SPX 5300 Device Assembly, Device Assembly: step 1, image 1 of 2

Cobra SPX 5300 Device Assembly, Device Assembly: step 1, image 2 of 2

Remove the four 9.5 mm Phillips #0 screws from the back of the device.

Step 2

Pull the black plastic back case off of the device.

Step 3

Lift up the motherboard and lay it flat next to the device.
Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.