What you need
-
-
Remove the 14 screws securing the bottom case to the laptop.
-
Unclip the case by sliding a plastic spudger into the slots in the case.
-
Remove the bottom case.
-
-
-
-
Remove the Phillips screw securing the WiFi card.
-
Pull the card straight out from the connector.
-
Unclip the antenna wires from the card.
-
Almost done!
To reassemble your device, follow the instructions in reverse order.
Conclusion
To reassemble your device, follow the instructions in reverse order.
Special thanks to these translators:
fr en
100%
Jerry Wheeler is helping us fix the world! Want to contribute?
Start translating ›