Skip to main content

Whirlpool Dryer Power Cord Replacement

What you need

  1. Whirlpool Dryer Power Cord Replacement, Safety Precautions: step 1, image 1 of 1
    • Before you begin your repair, unplug your dryer.

    • Your power cord may have four prongs rather than three. The additional prong is a ground connection.

  2. Whirlpool Dryer Power Cord Replacement, Unfasten the cover plate: step 2, image 1 of 1
    • Remove the cover plate screw.

  3. Whirlpool Dryer Power Cord Replacement, Remove the cover plate: step 3, image 1 of 3 Whirlpool Dryer Power Cord Replacement, Remove the cover plate: step 3, image 2 of 3 Whirlpool Dryer Power Cord Replacement, Remove the cover plate: step 3, image 3 of 3
    • Remove the cover plate.

  4. Whirlpool Dryer Power Cord Replacement, Disconnect the cord: step 4, image 1 of 1
    • Remove the screws securing the cord cables.

    • Mark the cables with a permanent marker if needed and take a picture or draw a diagram.

  5. Whirlpool Dryer Power Cord Replacement, Remove the cord: step 5, image 1 of 3 Whirlpool Dryer Power Cord Replacement, Remove the cord: step 5, image 2 of 3 Whirlpool Dryer Power Cord Replacement, Remove the cord: step 5, image 3 of 3
    • Pull the cord carefully down through the round hole.

    • Make sure you replace the connections correctly when you reassemble.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Ask our Answers community for help.

Bill Gilbert

Member since: 06/30/22

29,938 Reputation

213 Guides authored

Team

iFixit Member of iFixit

Staff

135 Members

17,198 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 56

All Time: 246