Fix Your Stuff Community Store

iPad 3 Wi-Fi Front Panel Assembly Replacement

Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Introduction

Preq for removing the front panel. Specific to the iPad 3, also involves moving the LCD over.

What you need

  1. iPad 3 Wi-Fi Front Panel Assembly Replacement, Front Panel Assembly: step 1, image 1 of 1

    • Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame.

    Edit

  3. iPad 3 Wi-Fi Front Panel Assembly Replacement: step 2, image 1 of 3 iPad 3 Wi-Fi Front Panel Assembly Replacement: step 2, image 2 of 3 iPad 3 Wi-Fi Front Panel Assembly Replacement: step 2, image 3 of 3

    • Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.

    • Rotate the LCD along its left edge and lay it down on top of the front panel.

    • Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 4

All Time: 207