Introduction

In this guide you will learn, step-by-step, how to open the Waka Waka Power Plus and remove the battery.

Parts

No parts required.

Lay device so power button is facing up. Lift the plastic cover from the center of the device.
  • Lay device so power button is facing up.

  • Lift the plastic cover from the center of the device.

Add Comment

Remove yellow rubber dots. Remove yellow rubber dots.
  • Remove yellow rubber dots.

Add Comment

Remove the two 5mm screws with a #0 Phillips screwdriver.
  • Remove the two 5mm screws with a #0 Phillips screwdriver.

Add Comment

Carefully remove yellow casing. Caution: this might take prying force.
  • Carefully remove yellow casing.

    • Caution: this might take prying force.

Add Comment

You now separated the black part containing the battery and the yellow case. Remove the springs and their white casings to easily reach the battery. Remove the springs and their white casings to easily reach the battery.
  • You now separated the black part containing the battery and the yellow case.

  • Remove the springs and their white casings to easily reach the battery.

Add Comment

Unplug the battery from the motherboard.
  • Unplug the battery from the motherboard.

Add Comment

Remove the battery by lifting it out. Note: the battery is stuck with double sided tape and may take some effort to remove.
  • Remove the battery by lifting it out.

    • Note: the battery is stuck with double sided tape and may take some effort to remove.

Add Comment

Conclusion

Replacement batteries can be found online. After placing in the new battery reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Emma

Member since: 04/06/2015

28 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 127