Introduction
Use this guide to drain the oil on a Wacker BS50-4AS REV 101 (2019) Vibrator/Rammer.
This model requires up to 0.7 liters of SAE 10W-40 oil to replace drained oil.
What you need
-
-
Firmly grip the base of the spark plug wire's connector and pull it away from the spark plug to disconnect it.
-
-
-
Use a 1-1/16 inch socket to break loose the oil sight gauge near the bottom of the device.
-
-
-
-
Lay the device down horizontally with the oil sight gauge facing down.
-
Position a shallow oil drain pan underneath the sight gauge.
-
-
-
Remove the oil sight gauge.
-
Let the oil drain until drips are infrequent.
-
Replace and retighten the oil sight gauge.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
