Introduction

Instructions to replace winder motor and gear assembly.

Image 1/1: Unplug the power cord
  • Turn the winder off

  • Unplug the power cord

Add Comment

Image 1/2: Image 2/2:
  • Pull angled turntable platform toward you by upper seam

Add Comment

Image 1/1:
  • Unplug motor connection cable from circuit board

Add Comment

Image 1/2: Remove round watch insert Image 2/2: Unscrew single retaining screw from cup
  • Unscrew two retaining screws from gearbox

  • Remove round watch insert

  • Unscrew single retaining screw from cup

Add Comment

Image 1/1: Follow steps in reverse order to replace motor
  • Pull gearbox and motor out from back of the turntable platform

  • Follow steps in reverse order to replace motor

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

easy_source

Member since: 02/24/2017

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 15

Past 30 Days: 17

All Time: 17