Introduction

Is your master switch stuck or non-functional? This guide will show you how to replace it.

Parts

No parts required.

Make sure the master switch is  "OFF" before disassembly, to avoid an electric shock.
  • Make sure the master switch is "OFF" before disassembly, to avoid an electric shock.

  • Flip the watch over with the back facing up.

Add Comment

Unscrew the four 6.0 mm screws on the back plate with the Phillips #00 screwdriver.
  • Unscrew the four 6.0 mm screws on the back plate with the Phillips #00 screwdriver.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Gently pull the back plate from the watch casing.
  • Gently pull the back plate from the watch casing.

Add Comment

Lift the master switch from the circuit board. Lift the master switch from the circuit board.
  • Lift the master switch from the circuit board.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Amber Hamlet

Member since: 01/20/2016

279 Reputation

2 Guides authored

Team

USF Tampa, Team 10-6, Remmell Spring 2016 Member of USF Tampa, Team 10-6, Remmell Spring 2016

USFT-REMMELL-S16S10G6

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 20

Past 30 Days: 87

All Time: 1,930