Introduction

When Emil won't work well, deoxidize the springs.

Emil is a talking baby-laptop which works with cards, that have holes which trigger the programs.

When the spring sensors are oxidized, the cards can't work and the programs don't start.

So you must deoxidize the contacts at the springs.

Image 1/3: There are 6 short screws around the "display" Image 2/3: ...and two longer screws under that "display" Image 3/3: ...and two longer screws under that "display"
  • First you must detach thes round yellow plugs which cover the screws.

  • There are 6 short screws around the "display"

  • ...and two longer screws under that "display"

Add Comment

Image 1/1:
  • Here a view of these screws

Add Comment

Image 1/3: Down there is a spring and a plastic part, look at the pictures Image 2/3: Down there is a spring and a plastic part, look at the pictures Image 3/3: Down there is a spring and a plastic part, look at the pictures
  • Now just pull it to open.

  • Down there is a spring and a plastic part, look at the pictures

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • There you have these contact springs.

Add Comment

Image 1/2: After reassembling, Emil nnow knows every card and can talk and sing. Image 2/2: Done. :)
  • The springs are deoxidized with a electronics-cleaner-spray.

  • After reassembling, Emil nnow knows every card and can talk and sing.

  • Done. :)

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Schwarzstein

Member since: 07/15/2013

2,025 Reputation

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 78