Introduction

Complete the following guide to replace your tablet's speaker.

At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver. At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.
  • At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.

Add Comment

Wedge a plastic opening tool into the edges of the tablet to pry it open. Wedge a plastic opening tool into the edges of the tablet to pry it open.
  • Wedge a plastic opening tool into the edges of the tablet to pry it open.

Add Comment

Soldering iron may be dangerous for inexperienced users.  For additional information on how to use a soldering iron, click here. Use a soldering iron to detach the speaker wires from the motherboard. Use a soldering iron to detach the speaker wires from the motherboard.
  • Soldering iron may be dangerous for inexperienced users. For additional information on how to use a soldering iron, click here.

  • Use a soldering iron to detach the speaker wires from the motherboard.

Add Comment

Use a curved metal spudger to remove the speaker from the back case. The speaker is held in place by an adhesive and can be difficult to remove. The speaker is held in place by an adhesive and can be difficult to remove.
  • Use a curved metal spudger to remove the speaker from the back case.

  • The speaker is held in place by an adhesive and can be difficult to remove.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sabrina Scholten

Member since: 09/22/2016

610 Reputation

6 Guides authored

Team

UC Davis, Team 2-1, Oliver Fall 2016 Member of UC Davis, Team 2-1, Oliver Fall 2016

UCD-OLIVER-F16S2G1

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 74