Introduction

Complete the following guide to replace your tablet's front camera.

  1. At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver. At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.
    • At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.

  2. Wedge a plastic opening tool into the edges of the tablet to pry it open. Wedge a plastic opening tool into the edges of the tablet to pry it open.
    • Wedge a plastic opening tool into the edges of the tablet to pry it open.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use a plastic opening tool to lift the black tab holding down the ribbon cable. Use a plastic opening tool to lift the black tab holding down the ribbon cable. Use a plastic opening tool to lift the black tab holding down the ribbon cable.
    • Use a plastic opening tool to lift the black tab holding down the ribbon cable.

  5. Carefully use your finger to pull out the ribbon cable. Carefully use your finger to pull out the ribbon cable.
    • Carefully use your finger to pull out the ribbon cable.

  6. Use a plastic opening tool to pull out the camera with the foam backing. Use a plastic opening tool to pull out the camera with the foam backing.
    • Use a plastic opening tool to pull out the camera with the foam backing.

  7. Remove the camera from the foam backing. Replace the camera. Replace the camera.
    • Remove the camera from the foam backing.

    • Replace the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sabrina Scholten

Member since: 09/22/2016

613 Reputation

6 Guides authored

Team

UC Davis, Team 2-1, Oliver Fall 2016 Member of UC Davis, Team 2-1, Oliver Fall 2016

UCD-OLIVER-F16S2G1

5 Members

12 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 79