Image 1/3: All screws throughout this guide are the same 3mm size. Image 2/3: All screws throughout this guide are the same 3mm size. Image 3/3: All screws throughout this guide are the same 3mm size.
  • Remove the 3mm screws from bottom of tablet with the precision screwdriver and place on magnetic mat. label where they came from.

  • All screws throughout this guide are the same 3mm size.

Add Comment

Image 1/3: While holding the case open, insert the plastic opening tool to get a larger opening. Image 2/3: Once you have a slight opening, insert the spudger and work around the edges, separating the back plate from the front. Image 3/3: Once you have a slight opening, insert the spudger and work around the edges, separating the back plate from the front.
  • Using the spudger, create a small opening to be used to open the back case.

  • While holding the case open, insert the plastic opening tool to get a larger opening.

  • Once you have a slight opening, insert the spudger and work around the edges, separating the back plate from the front.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • now that the case is open, carefully remove the speakers and set aside.

Add Comment

Image 1/2: Image 2/2:
  • Gently remove the speakers from the back case with tweezers and set the case aside.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 18

All Time: 645