Fix Your Stuff Community Store

Verizon Ellipsis 10 Back Cover Replacement

Introduction

This guide is designed to provide you with simple steps to remove the back cover of the Verizon Ellipsis 10 to access the internal hardware.

What you need

  1. Verizon Ellipsis 10 Back Cover Replacement, Back Cover: step 1, image 1 of 1

    • Open the SD/SIM card cover to start prying off the back cover.

    Edit

  2. Verizon Ellipsis 10 Back Cover Replacement: step 2, image 1 of 1

    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

    Edit

  4. Verizon Ellipsis 10 Back Cover Replacement: step 3, image 1 of 1

    • Follow along the edge of the device to undo all of the retaining clips.

    Edit

  5. Verizon Ellipsis 10 Back Cover Replacement: step 4, image 1 of 1

    • Once all the clips are undone, the back panel should come off with little effort.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 3

Past 30 Days: 8

All Time: 354