1. Using one of the plastic opening tools, separate the plastic back from the tablet in one spot.
    • Using one of the plastic opening tools, separate the plastic back from the tablet in one spot.

    • Gently work the tool around the diameter of the tablet until the back pops completely off.

  2. Locate the camera as illustrated. Remove the 3 black screws at the top of the tablet.
    • Locate the camera as illustrated. Remove the 3 black screws at the top of the tablet.

    • Gently pull back the yellow piece so that the camera may be accessed.

    • Use the tweezers to pull back the black latch on the motherboard that holds the camera.

    • Finally, use the tweezers to remove the camera from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

T Smith

Member since: 11/02/2016

205 Reputation

2 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 45