Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

VIA GO with SSD

Views: 60

View statistics:

Past 24 Hours:
2
Past 7 Days:
19
Past 30 Days:
47
All Time:
60
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: No estimate
Difficulty: Moderate
Community-Contributed Guide

An awesome member of our community made this guide. It was not created by iFixit staff.

VIA GO with SSD

Introduction

Go to step 1 ↓

Guide to modify 50.4SU17.021 (or 50.4SU17.031) flex cable to be compatible with VIA-GO connector!

!!! DO NOT USE CABLE AS IS! ORIGINAL CABLE PINOUT WILL SHORT 5V RAIL TO THE GROUND!

cable has identical 20-pin connector, where SATA pins are correctly soldered, but other pins must be soldered complitly differently.

    1. VIA GO with SSD, the cable: step 1, image 1 of 3 VIA GO with SSD, the cable: step 1, image 2 of 3 VIA GO with SSD, the cable: step 1, image 3 of 3
      • cable overview and 20-pin connector closeup.

      Ask FixBot

      Add Comment

    2. VIA GO with SSD, cable pinout before: step 2, image 1 of 3 VIA GO with SSD, cable pinout before: step 2, image 2 of 3 VIA GO with SSD, cable pinout before: step 2, image 3 of 3
      • cable pinout is not compatible with VIA-GO until it is modified!

      Ask FixBot

      Add Comment

    3. VIA GO with SSD, cable pinout after: step 3, image 1 of 3 VIA GO with SSD, cable pinout after: step 3, image 2 of 3 VIA GO with SSD, cable pinout after: step 3, image 3 of 3
      • 20-pin connector on motherboard have (3pin)5V and (1pin)3.3V.

      • using only 5V since my SSD do not utilize 3.3V at all.

      Ask FixBot

      Add Comment

    4. VIA GO with SSD, result: step 4, image 1 of 2 VIA GO with SSD, result: step 4, image 2 of 2
      • SSD is now recognized and fully functional! there is not much space in the case, so SSD's casing is removed.

      • BIOS (default) admin password is v14goxxx. use it to verify/change settings (is not necessary to be able install and boot form SSD).

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with

Artur Huhtaniemi

Member since: 12/05/24

373 Reputation

3 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 19

Past 30 Days: 47

All Time: 60