Fix Your Stuff Community Store

Using a Floor Jack

What you need

  1. Using a Floor Jack, Using a Floor Jack: step 1, image 1 of 2 Using a Floor Jack, Using a Floor Jack: step 1, image 2 of 2

    • Place the hydraulic floor jack under the vehicle until the saddle is directly under the crossmember.

    • The crossmember is the long metal support beam that runs underneath from the front fender to the rear fender on both sides of the car.

    • The saddle is the round metal part of the jack that moves upward as you pump the jack up.

    Edit

  2. Using a Floor Jack, Using floor jack to lift car.: step 2, image 1 of 1

    • Push downward on the jack's lever to lift the saddle upward so that it contacts the crossmember. Continue pushing downward on the lever to lift the car upward.

    Edit

  4. Using a Floor Jack: step 3, image 1 of 1

    • Place the jack stand under the jack mounting point.

    • The jack mounting point is a metallic protrusion beneath each of the car doors.

    Edit

  5. Using a Floor Jack: step 4, image 1 of 1

    • Raise the jack stand until it contacts the jack mounting point.

    • In the event the floor jack fails, the jack stand is designed to prevent the car from falling.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

8 other people completed this guide.

Author

with 6 other contributors

Shaun MacDonald

Member since: 10/03/12

2,558 Reputation

8 Guides authored

Badges: 15

+12 more badges

Team

Cal Poly, Team 24-27, Regan Fall 2012 Member of Cal Poly, Team 24-27, Regan Fall 2012

CPSU-REGAN-F12S24G27

4 Members

22 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 56

Past 30 Days: 218

All Time: 40,010