Introduction

This replacement guide will require a soldering tool and various other iFixit tools.

Image 1/1:
  • Use a J1 Phillips screwdriver to remove the four 6.1 mm screws at the back of the monitor.

Add Comment

Image 1/1:
  • Use a metal spudger or an opening tool to pry open the device.

Add Comment

Image 1/1:
  • Use a J1 Phillips screwdriver to remove the three 6.1 mm screws on the motherboard.

Add Comment

Image 1/3: Desolder the four corners of the power button. Please follow this link on how to proceed to desolder: https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750 Image 2/3: Desolder the four corners of the power button. Please follow this link on how to proceed to desolder: https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750 Image 3/3: Desolder the four corners of the power button. Please follow this link on how to proceed to desolder: https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750
  • Carefully, lift the motherboard and turn it to the backside.

  • Desolder the four corners of the power button. Please follow this link on how to proceed to desolder: How To Solder and Desolder Connections

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Pauline Lara

Member since: 10/04/2016

277 Reputation

2 Guides authored

Team

USF Tampa, Team 1-1, Nance Fall 2016 Member of USF Tampa, Team 1-1, Nance Fall 2016

USFT-NANCE-F16S1G1

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 5

All Time: 99