Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

The UTStarcom XV6700 battery can be quickly changed in three easy steps.

Parts

No parts specified.

  1. Press the on/off button on the top to power the phone off.
    • Press the on/off button on the top to power the phone off.

  2. Remove the battery cover by pressing and sliding the cover down and off of the phone.
    • Remove the battery cover by pressing and sliding the cover down and off of the phone.

  3. Pull the battery removal tab and lift the battery out of the phone. If the battery removal tab is missing, place a spudger on the opposite side of the highlighted connector and pry the battery up. If the battery removal tab is missing, place a spudger on the opposite side of the highlighted connector and pry the battery up.
    • Pull the battery removal tab and lift the battery out of the phone.

    • If the battery removal tab is missing, place a spudger on the opposite side of the highlighted connector and pry the battery up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 3

All Time: 214