Introduction
In this procedure we must take care to put the correct blades on the correct motor, because white propellers bend in one direction while black propellers are opposite.
What you need
-
-
Remove the 5 mm screws connecting each propeller to the rotating post using a Phillips #000 screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UMass Dartmouth, Team 1-4, Miles Spring 2016 Member of UMass Dartmouth, Team 1-4, Miles Spring 2016
UMASSD-MILES-S16S1G4
3 Members
5 Guides authored
