Introduction
The back buttons, sometimes known as paddle buttons, of the Turtle Beach Stealth Ultra controller (model number TBS-0710-05) are essential for the controller's usability. They allow users to reprogram custom inputs into them for a unique experience. In order to replace them, you first need to disassemble the controller. As you do, be cautious not to damage the screen or motherboard. Follow these steps to fix it.
Additional Resources:
Stealth Ultra Controller Support Site
Video on Turtle Beach Stealth Ultra Disassembly and Reassembly
What you need
-
-
Remove the sticker on the back of the plate.
-
Remove the 10 mm screws from the back plate using a Phillips #00 screwdriver.
-
-
-
-
Use an iFixit opening tool to pry the front button plate and analog stick plate off.
-
Use a Phillips #00 screwdriver to remove the screws from the front plate on both sides of the controller.
-
-
-
Remove the four 10 mm screws from the back plate using a Phillips #00 screwdriver.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Utah Tech University, Team 1-7, McMurrin Fall 2025 Member of Utah Tech University, Team 1-7, McMurrin Fall 2025
UTAHTECH-MCMURRIN-F25S1G7
2 Members
7 Guides authored
