Turtle Beach Pure Air Bottom Cover Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

Opening the Turtle Beach Pure Air Wireless Mouse is the first step for many internal repairs, including battery replacement and component inspection. This guide walks you through the process of safely removing the outer shell to access the internal hardware. Follow each step carefully to avoid damaging the plastic clips or internal components.

What you need

1. Step 1 Bottom Cover
  Power off the mouse by moving the power switch to the center.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Peel back the mouse feet.
  
  Remove the three 1.6mm screws using a JIS #000 screwdriver.
  
  Remove the single 1.6mm screws using remove using a 1.3 mm hex screwdriver.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3
  Carefully remove the bottom cover of the mouse.
  
  Be cautious of the cable connecting the bottom cover to the rest of the mouse.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
5. Step 4
  Disconnect the ribbon cable securing the upper shell to the motherboard.
  
  Lift the locking clip to release the cable from its connector.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 2 other contributors

Preston Sanchez

Member since: 02/03/26

291 Reputation

3 Guides authored

Team

Austin Community College, Team 9-1, Watkins Spring 2026 Member of Austin Community College, Team 9-1, Watkins Spring 2026

AUSTINCC-WATKINS-S26S9G1

3 Members

6 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 2

Past 7 Days: 10

Past 30 Days: 26

All Time: 132