Introduction

The purpose of this guide is to aid users in replacing a broken headband on their headset. It will show users how to replace a headband that is broken or damaged.

Parts

No parts required.

Using a Phillips #0 screwdriver, remove the three  4.5 mm screws from the adjustment plate on both the left and right side. When reassembling the headband, make sure the left and right sides of the headband line up with their respective designations.
  • Using a Phillips #0 screwdriver, remove the three 4.5 mm screws from the adjustment plate on both the left and right side.

  • When reassembling the headband, make sure the left and right sides of the headband line up with their respective designations.

Add Comment

Lift the headband from the headset and replace with the new one. Lift the headband from the headset and replace with the new one.
  • Lift the headband from the headset and replace with the new one.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Alexis Uribe

Member since: 03/24/2017

443 Reputation

4 Guides authored

Team

Baylor, Team S5-G1, Williams Spring 2017 Member of Baylor, Team S5-G1, Williams Spring 2017

BU-WILLIAMS-S17S5G1

3 Members

4 Guides authored

4 Comments

Where did you buy the piece to replace

Audiz - Reply

I need you urgently, please

Audiz - Reply

I need the hand band where can u buy one

Anthony Lara - Reply

I need that headband piece as well! Where do you buy it?

Imanol Caba - Reply

Add Comment

View Statistics:

Past 24 Hours: 8

Past 7 Days: 38

Past 30 Days: 153

All Time: 591