Introduction

In order to complete this repair, you will need to order a replacement headband to replace the defective part.

Parts

No parts required.

Grab one end of the headband pad and pull up slightly, exposing where it is glued to to the backing. Grab one end of the headband pad and pull up slightly, exposing where it is glued to to the backing.
  • Grab one end of the headband pad and pull up slightly, exposing where it is glued to to the backing.

Using a thin tool carefully scrape away the glue underneath the band while pulling the pad up, careful not to rip it. Using a thin tool carefully scrape away the glue underneath the band while pulling the pad up, careful not to rip it.
  • Using a thin tool carefully scrape away the glue underneath the band while pulling the pad up, careful not to rip it.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Once the pad has been completely removed, scrape off any remaining residue. Once the pad has been completely removed, scrape off any remaining residue. Once the pad has been completely removed, scrape off any remaining residue.
  • Once the pad has been completely removed, scrape off any remaining residue.

Follow the directions of the replacement pad on how to attach it to the headband.
  • Follow the directions of the replacement pad on how to attach it to the headband.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Noah Franklin

Member since: 10/27/2015

437 Reputation

5 Guides authored

Team

UMass Dartmouth, Team 2-3, Shastany Fall 2015 Member of UMass Dartmouth, Team 2-3, Shastany Fall 2015

UMASSD-SHASTANY-F15S2G3

3 Members

5 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 15

Past 30 Days: 76

All Time: 2,254