Image 1/1:
  • Remove 2 black 4 cm Phillips screws on either side of the bottom of the device.

Add Comment

Image 1/2: Image 2/2:
  • Use the plastic opening tools and the spudger around the outside of silver metal back plate on the device to pry off the back plate.

Add Comment

Image 1/3: Gently pull out flex cable. Image 2/3: Gently pull out flex cable. Image 3/3: Gently pull out flex cable.
  • Use plastic opening tool to lift up black clip.

  • Gently pull out flex cable.

Add Comment

Image 1/1: Gently pull up on plastic to uncover clip connected to the camera.
  • Remove 3 silver 4 cm Phillips screws holding down black plastic speaker cover.

  • Gently pull up on plastic to uncover clip connected to the camera.

Add Comment

Image 1/2: Remove the front/rear camera. Image 2/2: Remove the front/rear camera.
  • Use the tweezers and gently lift up on the clip.

  • Remove the front/rear camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Edward Insogna

Member since: 03/23/2015

626 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 64