Tools

No tools required.

Obtain one tail light mounting bracket and one screw as shown in the picture.
  • Obtain one tail light mounting bracket and one screw as shown in the picture.

  • The screw should be removed from the mounting bracket.

Add Comment

Clean the bicycle seat post and mounting bracket.
  • Clean the bicycle seat post and mounting bracket.

  • Wrap the mounting bracket strap around the seat post.

  • Verify the larger piece rests towards the tail end aligned with the tires.

  • Verify the bracket's screw hole is on the right side of the bicycle.

Add Comment

Locate the slot on the bracket where the strap will be inserted. Insert the strap into the slot.
  • Locate the slot on the bracket where the strap will be inserted.

  • Insert the strap into the slot.

  • Tighten the strap just enough to keep the bracket in place.

Add Comment

Insert the screw into the bracket screw hole. Tighten the screw with fingers until the mounting bracket rests freely on seat post.
  • Insert the screw into the bracket screw hole.

  • Tighten the screw with fingers until the mounting bracket rests freely on seat post.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kaveh Karimiyanha

Member since: 09/24/2012

759 Reputation

7 Guides authored

Team

Cal Poly, Team 1-1, Propen Fall 2012 Member of Cal Poly, Team 1-1, Propen Fall 2012

CPSU-PROPEN-F12S1G1

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 5

All Time: 927