Begin by removing all of the screws around the perimeter of the screen. There are 6 total. Begin by removing all of the screws around the perimeter of the screen. There are 6 total.
  • Begin by removing all of the screws around the perimeter of the screen. There are 6 total.

Add Comment

Gently remove the plastic lining of the screen. Use a card, guitar pic, or another tool to pry open the lining, but be careful during this process. Gently remove the plastic lining of the screen. Use a card, guitar pic, or another tool to pry open the lining, but be careful during this process.
  • Gently remove the plastic lining of the screen. Use a card, guitar pic, or another tool to pry open the lining, but be careful during this process.

Add Comment

Black Friday
Broken doesn't stand a chance.
Once the plastic lining is loose from the device, you can remove the lining. Gently pop the lining of the screen off of the hinges of the computer. Once the plastic lining is loose from the device, you can remove the lining. Gently pop the lining of the screen off of the hinges of the computer.
  • Once the plastic lining is loose from the device, you can remove the lining. Gently pop the lining of the screen off of the hinges of the computer.

Add Comment

Unscrew the screws located on the sides of the silver part of the screen. Some of the screws are smaller than others, so be sure to get all of them. The screen cannot come off if the screws are not all out. Unscrew the screws located on the sides of the silver part of the screen. Some of the screws are smaller than others, so be sure to get all of them. The screen cannot come off if the screws are not all out.
  • Unscrew the screws located on the sides of the silver part of the screen. Some of the screws are smaller than others, so be sure to get all of them. The screen cannot come off if the screws are not all out.

Add Comment

At this point, your screen is almost disconnected. Be sure to support the screen because there is nothing holding it up. At this point, your screen is almost disconnected. Be sure to support the screen because there is nothing holding it up.
  • At this point, your screen is almost disconnected. Be sure to support the screen because there is nothing holding it up.

Add Comment

Gently remove the tape from the screen. After you have done so, your screen is ready to be replaced! Gently remove the tape from the screen. After you have done so, your screen is ready to be replaced!
  • Gently remove the tape from the screen. After you have done so, your screen is ready to be replaced!

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Addie Reames

Member since: 10/10/2016

210 Reputation

2 Guides authored

Team

Texas Tech, Team 6-5, Bennett Fall 2016 Member of Texas Tech, Team 6-5, Bennett Fall 2016

TTU-BENNETT-F16S6G5

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 10

All Time: 166