Introduction

The battery is the main source of the device. Be sure to unplug the device from any power source before attempting to remove the battery.

  1. Turn the laptop off, unplug the AC adapter, and any other auxiliary components.
    • Turn the laptop off, unplug the AC adapter, and any other auxiliary components.

    • Turn over the laptop and proceed to take out the seven 5mm silver JIS #1 head screws. If some of the screws are difficult to take out use the tweezers to help.

  2. Use the screwdriver to take out the three 5mm black JIS #1 head screws that are located on the hinge.
    • Use the screwdriver to take out the three 5mm black JIS #1 head screws that are located on the hinge.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use the spudger to pry under the back cover until it pops off. Use the spudger to pry under the back cover until it pops off.
    • Use the spudger to pry under the back cover until it pops off.

  5. Unscrew the four 5 mm JIS #1 head screws holding the battery to the device and gently remove the battery.
    • Unscrew the four 5 mm JIS #1 head screws holding the battery to the device and gently remove the battery.

  6. Disconnect the battery from the motherboard by gently pulling out the black connector. Disconnect the battery from the motherboard by gently pulling out the black connector.
    • Disconnect the battery from the motherboard by gently pulling out the black connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lawrence Lozada

Member since: 09/25/2017

225 Reputation

2 Guides authored

Team

USF Tampa, Team S3-G2, Cannon Fall 2017 Member of USF Tampa, Team S3-G2, Cannon Fall 2017

USFT-CANNON-F17S3G2

4 Members

7 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 20

All Time: 240