Introduction

Is your computer running slow? Just need some more space? In this installation guide we are going to take you through the steps to install Random Access Memory (RAM) in your Toshiba Satellite C655D-S5084.

Turn the laptop over and place upside down on a flat surface. Remove the 5.5 mm "F5" screw with the Phillips #1 screwdriver and lift off plastic cover.
  • Turn the laptop over and place upside down on a flat surface.

  • Remove the 5.5 mm "F5" screw with the Phillips #1 screwdriver and lift off plastic cover.

Add Comment

Take two fingers and gently pull the two metal tabs away from the RAM module as shown.
  • Take two fingers and gently pull the two metal tabs away from the RAM module as shown.

    • There are two tabs for each of the two RAM modules.

    • The RAM module should be slightly dislodged from the base after the two tabs are pulled.

Add Comment

Grip the edge of the card and slide the RAM module out by pulling horizontally.
  • Grip the edge of the card and slide the RAM module out by pulling horizontally.

  • Once the first RAM module has been removed, repeat steps 2 and 3 to remove the second RAM module.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Shelby Kunz

Member since: 04/19/2013

45 Reputation

5 Guides authored

Team

Cal Poly, Team 2-20, Maness Spring 2013 Member of Cal Poly, Team 2-20, Maness Spring 2013

CPSU-MANESS-S13S2G20

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 11

Past 30 Days: 70

All Time: 2,167