Parts

No parts required.

Introduction

If your battery is not working and you need to take it out, do the following steps to remove it properly.

Image 1/3: Unscrew the two 6.5mm PH1 Phillips head screws below the battery. Image 2/3: Unscrew the two 6.5mm PH1 Phillips head screws below the battery. Image 3/3: Unscrew the two 6.5mm PH1 Phillips head screws below the battery.
  • Make sure you turn off the laptop before starting.

  • Unscrew the two 6.5mm PH1 Phillips head screws below the battery.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Abdel Feliciano Gonzalez

Member since: 02/28/2017

446 Reputation

4 Guides authored

Team

USF Tampa, Team S1-G5, Nance Spring 2017 Member of USF Tampa, Team S1-G5, Nance Spring 2017

USFT-NANCE-S17S1G5

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 11

All Time: 94