Introduction

Screen replacement for this laptop is simple and only requires a screwdriver and a plastic opening tool.

Image 1/1: Using a phillips head screwdriver to remove the screws that secure the back
  • Begin by removing the battery and flipping the laptop over to see the screws

  • Using a phillips head screwdriver to remove the screws that secure the back

Add Comment

Image 1/1: Lift up the bottom panel where the mouse click buttons are
  • Flip the laptop back over and open it up carefully

  • Lift up the bottom panel where the mouse click buttons are

  • Lift up slowly as simply flip it up and rest it on the keyboard as not to damage the ribbon cable connecting it

  • Using the spudger disconnect the ribbon cable connected to the bottom of the panel

Add Comment

Image 1/1: Then simply lift the keyboard up and slide it down and out
  • Using the same size phillips as before remove the two screws that hold the keyboard in place

  • Then simply lift the keyboard up and slide it down and out

Add Comment

Image 1/1: Once you remove the final screw be careful as the screen will want to fall back to prevent damage
  • Using the phillips remove the 3 screws that hold the screen mount to the rest of the keyboard

  • Once you remove the final screw be careful as the screen will want to fall back to prevent damage

Add Comment

Image 1/1: Using the phillips screw driver remove the final 3 screws securing the screen
  • Pull the screen off the rest of the laptop and flip it over

  • Using the phillips screw driver remove the final 3 screws securing the screen

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ashley Furtado

Member since: 10/20/2016

101 Reputation

1 Guide authored

Team

UMass Dartmouth, Team 6-4, Martin Fall 2016 Member of UMass Dartmouth, Team 6-4, Martin Fall 2016

UMASSD-MARTIN-F16S6G4

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 52