Step 1 Cleaning the solder pads

• All remaining pads should be cleaned with desoldering wick.
• The torn pads will have to be repaired later with some wires.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2 Removing the plug-in connector




• The remaining pads are used to resolder the connector
• For the torn-off pads, we have to solder the connector contacts directly to the surrounding components using a wire.
• First the middle pin
• Then the outer pins
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-141676" src="https://www.ifixit.com/Guide/embed/141676/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-141676"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/141676" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview