Introduction

The speaker is underneath the motherboard so power off the device before starting the disassembly.

Unscrew the two 3mm screws at the base of the device using the T5 screwdriver.
  • Unscrew the two 3mm screws at the base of the device using the T5 screwdriver.

Add Comment

Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top. There are 14 latches that need to be undone.
  • Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top.

  • There are 14 latches that need to be undone.

  • The latches break easily during the opening process so we recommend purchasing a new screen casing if they break.

Add Comment

With the screen casing unlatched, locate the right side where the two connectors are.
  • With the screen casing unlatched, locate the right side where the two connectors are.

Add Comment

Unlatch the connectors using the plastic opening tool. The orange rectangular connector may have come off in the process of removing the screen casing. The orange rectangular connector may have come off in the process of removing the screen casing.
  • Unlatch the connectors using the plastic opening tool.

  • The orange rectangular connector may have come off in the process of removing the screen casing.

Add Comment

Separate the screen casing from the motherboard casing. Separate the screen casing from the motherboard casing.
  • Separate the screen casing from the motherboard casing.

Add Comment

Unscrew the five 4mm screws using the Phillips #0 screwdriver.
  • Unscrew the five 4mm screws using the Phillips #0 screwdriver.

Add Comment

Unplug the connector shown near the center of the motherboard using the tweezers. Unplug the connector shown near the center of the motherboard using the tweezers.
  • Unplug the connector shown near the center of the motherboard using the tweezers.

Add Comment

Unplug the second connector using the plastic opening tool. Unplug the second connector using the plastic opening tool.
  • Unplug the second connector using the plastic opening tool.

Add Comment

Remove the motherboard from the casing. Remove the motherboard from the casing.
  • Remove the motherboard from the casing.

Add Comment

The speaker is located next to the battery.
  • The speaker is located next to the battery.

Add Comment

Pinch the speaker at the rubber grommets and tug gently. Pinch the speaker at the rubber grommets and tug gently. Pinch the speaker at the rubber grommets and tug gently.
  • Pinch the speaker at the rubber grommets and tug gently.

Add Comment

Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker. Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker. Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker.
  • Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicholas Maharaj

Member since: 09/22/2016

101 Reputation

1 Guide authored

Team

UC Davis, Team 2-5, Oliver Fall 2016 Member of UC Davis, Team 2-5, Oliver Fall 2016

UCD-OLIVER-F16S2G5

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 83