Fix Your Stuff Community Store

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement

Introduction

Use this guide to replace the bypass valve assembly in your Titan Impact 410 Airless Sprayer.

What you need

  1. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Safety precautions: step 1, image 1 of 2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Safety precautions: step 1, image 2 of 2

    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.

    • Turn off and unplug the sprayer.

    Edit

  2. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: step 2, image 1 of 3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: step 2, image 2 of 3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: step 2, image 3 of 3

    • Use a flat punch tool and a hammer to tap the groove pin from left to right out of the valve handle.

    Edit

  4. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement: step 3, image 1 of 2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement: step 3, image 2 of 2

    • Remove the valve handle from the cam base.

    • During reassembly, apply grease to the cam base before reattaching the valve handle.

    Edit

  5. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: step 4, image 1 of 3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: step 4, image 2 of 3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: step 4, image 3 of 3

    • Remove the cam base.

    Edit

  6. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Loosen the bypass valve assembly: step 5, image 1 of 2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Loosen the bypass valve assembly: step 5, image 2 of 2

    • Use a 13/16" wrench, or an adjustable wrench, to loosen the bypass valve assembly.

    • Rotate the wrench counterclockwise.

    Edit

  7. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the bypass valve assembly: step 6, image 1 of 2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the bypass valve assembly: step 6, image 2 of 2
    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 1 other contributor

Alex Diaz-Kokaisl

Member since: 01/16/22

125,004 Reputation

582 Guides authored

Badges: 34

+31 more badges

Team

iFixit Member of iFixit

Staff

136 Members

17,430 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 10

Past 30 Days: 30

All Time: 488