Introduction
The 2nd generation Tiptoi pen suddenly stopped working.
Changing the battery and connecting it to the PC doesn't help, so I unscrew the part.
There is a flat connection cable from the electronics to the control unit, disconnect the cable and treat the contacts with contact spray, then the pen works again.
What you need
-
-
-
-
Carefully fold the black plastic part upwards, then pull out the flat cable with tweezers.
-
Treat the connector with contact spray.
-
Carefully insert the flat cable again, with the blue marking facing upwards, fold the black plastic part down again.
-
Put the pen back together.
-
Ask FixBot
Reverse the steps to reassemble your device.
Cancel: I did not complete this guide.
2 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
