Parts

Image 1/1: New Pannier Bottom Stay Bracket.
  • Tools needed:

    • New Pannier Bottom Stay Bracket.

    • Standard Screwdriver

    • Wrench

Add Comment

Image 1/2: Image 2/2:
  • To remove bottom stay bracket, first unscrew all 4 screws. To do so, undo velcro flap located at the top of the laptop sleeve. With the wrench, hold nut in place in the back of the pannier, while using the screwdriver to unscrew the screw in the front bracket.

Add Comment

Image 1/1: Follow step 2 in reverse order to attach new clip bracket. (Hold nut with wrench while screwing back in place. Also make sure the washers are between the screws and the body of the bag.)
  • Remove old clip. Take new bottom bracket and remove all screws and washers from bracket (Make sure to put all screws, washers, and nuts in a safe place (Ziploc bag) as to not lose any!)

  • Follow step 2 in reverse order to attach new clip bracket. (Hold nut with wrench while screwing back in place. Also make sure the washers are between the screws and the body of the bag.)

Add Comment

Image 1/1:
  • All Done!

Add Comment

Finish Line

Emilee

Member since: 03/13/2014

1,251 Reputation

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 209