Fix Your Stuff Community Store

Tilting the EDCO Floor Stripper TS8 .75L (2017)

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

Follow this guide to safely tilt the EDCO Floor Stripper TS8 .75L (2017) with wheel chocks.

What you need

  1. Tilting the EDCO Floor Stripper TS8 .75L (2017), Safety precautions: step 1, image 1 of 1

    • Before you begin, ensure the device is powered down and cool to the touch.

    • Ensure the machine is unplugged.

    • Turn the power switch counterclockwise into the OFF position.

    Edit

  3. Tilting the EDCO Floor Stripper TS8 .75L (2017), Tilt the device: step 2, image 1 of 3 Tilting the EDCO Floor Stripper TS8 .75L (2017), Tilt the device: step 2, image 2 of 3 Tilting the EDCO Floor Stripper TS8 .75L (2017), Tilt the device: step 2, image 3 of 3

    • Tilt the device back to rest on its handle.

    • Ensure that the four 9/16 inch motor mount bolts are tightened before tilting the device.

    Edit

  4. Tilting the EDCO Floor Stripper TS8 .75L (2017), Chock the wheels: step 3, image 1 of 1

    • Insert wheel chocks behind the wheels to ensure the device does not move or fall during the repair."

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Robert Boyd

Member since: 02/01/21

26,859 Reputation

94 Guides authored

Badges: 19

+16 more badges

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 23